MATEC Web Conf.
Volume 238, 2018International Conference on Novel Functional Materials (ICNFM2018)
|Number of page(s)||4|
|Section||Composite, Oxide and Ultrafine Materials|
|Published online||26 November 2018|
Microwave Synthesis of AlFeCuCrNi /TiB2 High-Entropy Alloy Matrix Composites
College of Materials Science and Engineering, Nanjing University of Science and Technology. Nanjing, 210094 ; P. R. China
a Corresponding author: firstname.lastname@example.org;
The Al-Fe-Cu-Cr-Ni-Ti-B system was microwaved to generate high entropy alloy matrix composites reinforced by TiB2 particles. The micro structure and reaction process of the composites were observed and investigated by modern analysis methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS) and differential scanning calorimeter (DSC) analysis. The results show that AlFeCuCrNi /TiB2 composites can be prepared by microwave heating method. The matrix structure was FCC, and the reinforcement TiB2 showed regular geometric morphology in the matrix and evenly distributed in the matrix when the volume fraction of the reinforcement is 10%. When the volume fraction of the reinforcement increased to 15%, TiB2 partially aggregates in the matrix, and the system activation energy was 195.69 kJ/mol.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.