| Issue |
MATEC Web Conf.
Volume 232, 2018
2018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|
|
|---|---|---|
| Article Number | 01053 | |
| Number of page(s) | 6 | |
| Section | Network Security System, Neural Network and Data Information | |
| DOI | https://doi.org/10.1051/matecconf/201823201053 | |
| Published online | 19 November 2018 | |
Crack Identification of Infrared Thermal Imaging Steel Sheet Based on Convolutional Neural Network
National and local joint engineering laboratories for disaster monitoring technologies and instruments, China Jiliang University, Hangzhou 310018, China
* Author to whom correspondence should be addressed; E-Mail: lq13306532957@163.com
Aiming at the low efficiency and poor anti-interference ability of traditional non-destructive testing technology in steel plate crack detection, a crack recognition method based on convolutional neural network for infrared thermal imager is proposed. Firstly, a rolling electric heating rod is developed as a thermal excitation source, and a new excitation method was used to thermally excite the surface to be inspected. Then, according to the principle of abnormal temperature generated during the heat transfer process, the temperature of the detected surface is analyzed. It is concluded that the temperature gradient on both sides of the crack is always the largest. Finally, the infrared thermal image after thermal excitation is collected as a training sample, and a convolutional neural network is built to train the sample. Experiments show that the convolutional neural network model can accurately identify the infrared image cracks. The detection efficiency is high and the robustness is strong. And the recognition accuracy on the test set reaches 96.82%.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.