Issue |
MATEC Web Conf.
Volume 230, 2018
7th International Scientific Conference “Reliability and Durability of Railway Transport Engineering Structures and Buildings” (Transbud-2018)
|
|
---|---|---|
Article Number | 02007 | |
Number of page(s) | 8 | |
Section | Structures, Buildings and Facilities | |
DOI | https://doi.org/10.1051/matecconf/201823002007 | |
Published online | 16 November 2018 |
Calculation of composite elements of slabs in buildings, structures and fragments of spans of bridges
Kharkiv National University of Construction and Architecture, 61002, Kharkiv, vul. Sumska, build. 40, Ukraine
* Corresponding author: sfomin@ukr.net
The calculation consists of two stages. The first one begins with the definition of their class, bearing capacity at temperature of 20 °C, according to EN 1992-1-1. At the second stage, the calculation at high temperatures shall be carried out in accordance with Eurocode 4 part 1-2. Comparison of the “stress-strain” diagram of concrete of class 30 under compression and temperature of 20 °C in two formulas showed their difference. That is, the designers do not have the opportunity to continue the calculation of diagrams at different heating temperatures. There was a need to improve the mathematical model of the “stress-strain” ratio of concrete high temperatures, clarification of the criteria of the bearing capacity of concrete in calculation of the fire resistance of composite structures in EN 1994-1-2:2005. In this paper, the method of determination of εcu1,θ developed has allowed, based on the energy approach, to formulate the corrected dependence of the limit deformation on temperature, dependence of the maximum deformation on temperature, and the value of the parameters of the “stress-strain” diagram. According to these data, using the formulas of the first stage, the “stress-strain” diagrams of the concrete of class 30 are calculated at the compression and heating according to EN 1992-1-2:2004.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.