Issue |
MATEC Web Conf.
Volume 227, 2018
2018 4th International Conference on Communication Technology (ICCT 2018)
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 3 | |
Section | Mechatronic Systems and Materials Science | |
DOI | https://doi.org/10.1051/matecconf/201822701005 | |
Published online | 14 November 2018 |
Model Verification for Material Parameters of Titanium Alloy Ti-6AL-4V and Steel
1
Institute of Science, Air Force Engineering University, Xi’an, 710051, China
2
Institute of photonics and photon-technology, Northwest University, Xi’an, 710069, China
a Corresponding author: author@e-mail.org
To carry out numerical simulation of TC4 titanium alloy blade impacted by foreign objects effectively, this paper takes the test results of steel ball and sandstone impacting titanium alloy flat blade inlet and blade surface as the benchmark, and uses ANSYS/LS-DYNA software to adopt kinematic hardening plasticity model to simulates the impact results and inverts the contact stiffness factor and the other three parameters were obtained by the way of inversion reasoning.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.