Issue |
MATEC Web Conf.
Volume 225, 2018
UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018)
|
|
---|---|---|
Article Number | 05023 | |
Number of page(s) | 10 | |
Section | Energy generation efficiency | |
DOI | https://doi.org/10.1051/matecconf/201822505023 | |
Published online | 05 November 2018 |
Performance Analysis of a Steam Power Plant: A Case Study
1
North Technical University, Iraq
2
Sudan University of Science ° Technology, Sudan.
* Corresponding author: waddhahhussein@yahoo.com
In this work, the evaluated performance of thermal station is mechanically studied by determining the performance parameters for generative unit, which it is given the calculation model by doing heat balance for each one of its principal parts. A comparison is done between the particle results, which are obtained from the station and the theoretical results which its calculated from the basic first law thermodynamics, The different working loads (40%, 70%, 100%) of its completes load have been considered in order to determine the optimum working circumstances, in addition to demonstrate the effect of some working and environmental circumstances on unit performance.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.