Issue |
MATEC Web Conf.
Volume 225, 2018
UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018)
|
|
---|---|---|
Article Number | 03012 | |
Number of page(s) | 8 | |
Section | Energy Management and Conservation | |
DOI | https://doi.org/10.1051/matecconf/201822503012 | |
Published online | 05 November 2018 |
Enhanced Cooling Process of Furnace Using Vortex Tube Cooling Device
1
Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600, Pekan, Pahang.
* Corresponding author: mohdhazwan@ump.edu.my
A furnace is a heating device, which is used for heating samples up to 1350°C. The conventional method to reduce the temperature of the furnace to room temperature requires more than 8 hours. Therefore, a vortex tube cooling device is used to enhance the cooling process. The vortex tube is a small cooling device that uses compressed gas to produce cold flow. In this study, 3 cooling methods were compared; the conventional method, room temperature compressed gas cooling method, and vortex tube cooling method. From the results, it is clear that the vortex tube is able to enhanced the cooling process. Comparing to the conventional method, the vortex tube can reduce the temperature 2-hour faster.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.