MATEC Web Conf.
Volume 220, 20182018 The 2nd International Conference on Mechanical, System and Control Engineering (ICMSC 2018)
|Number of page(s)||5|
|Section||Mechanical Engineering and Measurement Technology|
|Published online||29 October 2018|
Spark Plug with Integrated Chamber
1 Technical university of Liberec, Institute for Nanomaterials, Advanced Technology and Innovation, 461 17 Liberec, Czech Republic
2 Technical university of Liberec, Department of vehicles and engines, 461 17 Liberec, Czech Republic
Spark plug with integrated chamber increases the quality of ignition of homogenous mixture in the engine cylinder. Very small amount of burning mixture bursts (outflows) from chamber (so-called flame jet ignition) which heads into faster initial phase of burning. From view of cycle to cycle variations the procedure of consequent burning is more stable. Spark plug’s case with integrated chamber is exposed by higher thermal stress than classis spark plug. This fact has to be respected during design of spark plug with integrated chamber. This article shows the how configuration of the lower part of spark plug with integrated chamber can change the type of spark and how flame-jet ignition will affect parameters of burning mixture during operating cycle.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.