Issue |
MATEC Web Conf.
Volume 220, 2018
2018 The 2nd International Conference on Mechanical, System and Control Engineering (ICMSC 2018)
|
|
---|---|---|
Article Number | 03008 | |
Number of page(s) | 4 | |
Section | Power Machinery Engineering | |
DOI | https://doi.org/10.1051/matecconf/201822003008 | |
Published online | 29 October 2018 |
Distinctive Features of Altitude-velocity Characteristics of Detonation Gas Turbine Engines
Samara National Research University, Department of Aircraft Engine Theory, Samara, Russian Federation
The paper describes the distinctive features of the altitude-velocity characteristics of detonation gas turbine engines. The necessity of developing a new type of gas turbine engines is substantiated and the main features of detonation engines are described. The principal constructive scheme of detonation gas turbine engines is presented. Developed the one-dimensional mathematical model of detonation gas turbine engine. This model describes a working process in a gas generator and a traction module. Its verification with a real prototype is performed. A number of studies were carried out using the developed mathematical model. A comparison of the pulsating engine with the classic afterburner was performed. From the obtained results it is concluded that detonation engines are more economical than the engines of traditional schemes. It was also revealed that it is possible to obtain a range of flight speeds depending on a certain height only by adjusting the gas generator according to different control laws. In this regard, the purpose of further work will be the development of a three-dimensional mathematical model of the detonation engine and the creation on its basis of a stand of virtual tests for further research.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.