Issue |
MATEC Web Conf.
Volume 218, 2018
The 1st International Conference on Industrial, Electrical and Electronics (ICIEE 2018)
|
|
---|---|---|
Article Number | 04030 | |
Number of page(s) | 6 | |
Section | Industrial And Engineering Applications | |
DOI | https://doi.org/10.1051/matecconf/201821804030 | |
Published online | 26 October 2018 |
Influence of sheath gas flow rate in Ar induction thermal plasma with Ti powder injection on the plasma temperature by numerical calculation
1
Division of Electrical Engineering and Computer Science, Kanazawa University, Japan., Kakuma, Kanazawa 9201192, Japan.
2
Departement of Electrical Engineering, University of Sumatera Utara, Indonesia., Jalan Dr. T. Mansur No. 9 Kampus USU, +6262 8211045, Medan, Indonesia 20155
*
Corresponding author: julianta_srg@yahoo.co.id
Corresponding author: tanaka@ec.t.kanazawa-u.ac.jp
Numerical calculation was conducted to study the gas flow fields and temperature distribution in Ar inductively couple thermal plasma (ICTP) with titanium (Ti) powder injection. Influence of sheath gas flow rates at 90 L/min, 80 L/min and 70 L/min was investigated on the thermal plasma temperature in the torch. Results indicated that higher sheath gas flow rate raises the axial temperature and gas flow velocity in the thermal plasma
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.