MATEC Web Conf.
Volume 218, 2018The 1st International Conference on Industrial, Electrical and Electronics (ICIEE 2018)
|Number of page(s)||8|
|Section||Industrial And Engineering Applications|
|Published online||26 October 2018|
Design of standard operating procedure (SOP) based at ergonomic working attitude through musculoskeletal disorders (Msd’s) complaints
Industrial Engineering Department, Engineering Faculty, University of Sultan Ageng Tirtayasa, Banten, Indonesia
2 Agribusiness Department, Agriculture Faculty, University of Sultan Ageng Tirtayasa, Banten, Indonesia
Corresponding author: firstname.lastname@example.org
PT PJC is a company synthetic resin. Synthetic resin is that produced by PT PJC is sold to the market in three types of packing, one of then is the drum packing type that weigh 208 kg. One of the activities that use the manual handling product (manual material handling) is the activity of filling, the drum-packed product will be transfered with drum packaging to the finishing goods area which done by the man force. Manual material handling concept has several advantages, one of which is easy to do by humans. However, manual handling material handling becomes an issue if the material load exceeds the maximum lifting of the worker because of the potential risk of injury to the human body, especially if it is carried out simultaneously for a relatively long period of time. One of the risks of human injury that can be experienced is Musculoskeletal Disorders (MSDs). This research will investigate the musculoskeletal complaints on Filling workers which will form the basic of the ergonomically-based Standard Operating Procedure (SOP) design basic. Data is taken by a Nordic Body Map (NBM) questionnaire. The result shows that most of the dominant body pain felt by the worker as the impact of previous day’s work was the complaints of pain on the left and right wrists, left and right palms, left and right knees, left and right calves, left and right ankles, while the pains felt by the workers after the activity are pain in the back, waist, left and right elbow, left and right thighs, left and right calvs, left and right ankles. The pain work will disappear after the night rest, but there is no guarantee that the worker’s body will be fit in the morning, because of the remnants of body pain that have not been fully fit, thus affecting the readiness of physical conditions at work in the morning. These body pain can be reduced by designing the right standard operating procedure (SOP) based on an ergonomic work attitude. Musculoskeletal pain before the activity were 39.3 ± 10.6 and after activity was 76.5 ± 14.9 or an increase in musculoskeletal pain of 94.66%.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.