Issue |
MATEC Web Conf.
Volume 218, 2018
The 1st International Conference on Industrial, Electrical and Electronics (ICIEE 2018)
|
|
---|---|---|
Article Number | 02004 | |
Number of page(s) | 8 | |
Section | Control Electronics, Circuits, and Systems | |
DOI | https://doi.org/10.1051/matecconf/201821802004 | |
Published online | 26 October 2018 |
Study and Analysis of Shading Effects on Photovoltaic Application System
Electrical Engineering, University of Jenderal Achmad Yani, Cimahi, Indonesia
a
Corresponding author: handoko.rusiana@lecture.unjani.ac.id
This study investigates the shading on PV systems. Shading has considerable influence on the solar cells characteristics, temperature and radiation on site need to be considered as the basis for designing PV systems. Modeling conducted on a 1 kWp PV system at a latitude of 6°53ˈ2.69̎S and a longitude of 107°32ˈ28.69̎, to find the magnitude of solar radiation, surface temperature, and tilt angle, and partial shadow simulation using PVsyst software. Testing result shows the characteristic PV 1 kWp is obtained with the angle of solar cell shade at 18˚, and azimuth 0˚, the shading per year generates 4.71 kWh/m2in a solar active area at 6.9m2, the power losses of 20.8% of its nominal power.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.