MATEC Web Conf.
Volume 212, 20182018 International Scientific Conference “Investment, Construction, Real Estate: New Technologies and Special-Purpose Development Priorities” (ICRE 2018)
|Number of page(s)||6|
|Section||New materials, Structures and Technologies for Construction in Specific Conditions of Siberia and the Far East|
|Published online||15 October 2018|
Possibilities of using the dispersed waste of asphalt-concrete plants in the Republic of Buryatia
Moscow State (National Research) University of Civil Engineering, 129337, Yaroslavskoye shosse, 26, Moscow, Russia
2 East Siberia State University of Technology and Management, 670013, Klyuchevskaya str., 40V, Ulan-Ude, Russia
3 Irkutsk National Research Technical University, 664074, Lermontova str., 83, Irkutsk, Russia
* Corresponding author: firstname.lastname@example.org
This article considers the possibility of using the dispersed waste of asphalt-concrete plants, namely the dust-entrainment, which is formed during the drying and heating of inert materials and accumulates in special dust-collecting facilities. The material under investigation corresponds to a finely dispersed filler used for the production of asphalt concrete mixtures for a number of features. It has been established that substitution of up to 50% of the mineral powder with its own dust-entrainment allows obtaining asphalt-concrete mixtures satisfying the requirements for the sharply continental climate.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.