Issue |
MATEC Web Conf.
Volume 196, 2018
XXVII R-S-P Seminar, Theoretical Foundation of Civil Engineering (27RSP) (TFoCE 2018)
|
|
---|---|---|
Article Number | 04059 | |
Number of page(s) | 8 | |
Section | Building Materials, Technologies, Organization and Management in Construction | |
DOI | https://doi.org/10.1051/matecconf/201819604059 | |
Published online | 03 September 2018 |
The thermal stress of roller-compacted concrete dams during construction
Moscow State University of Civil Engineering,
Yaroslavskoe shosse, 26,
Moscow,
129337,
Russia
*
Corresponding author: ntchuc.mta198@gmail.com
During the construction of concrete dams from rolled-compacted concrete, the main effect on the structure are the temperature effects. As a result of heat generation during hydration of cement and the influence of many other factors, significant temperature gradients and cracks may occur. In this paper, the optimal maximum temperatures arising in the body of the concrete dam under construction are determined by the method of experiment planning and the method of numerical simulation - the finite element method. The analysis of the influence of the acting factors on the temperature regime and the thermal stressed state at the rock-built concrete dam from rolled concrete is carried out. The dependences are obtained and nomograms are constructed to determine the optimal parameters. With the help of the computer program Midas Civil 2011, calculations of the temperature regime of the constructed dam were carried out and the maximum temperatures were determined. The calculations of thermal stress state of the structure along with an analysis of the possible cracking are conducted.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.