MATEC Web Conf.
Volume 196, 2018XXVII R-S-P Seminar, Theoretical Foundation of Civil Engineering (27RSP) (TFoCE 2018)
|Number of page(s)||8|
|Published online||03 September 2018|
Probabilistic assessment of pile capacity based on CPTu probing including random pile foundation depth
Wroclaw University of Science and Technology, Faculty of Civil Engineering,
Corresponding author : firstname.lastname@example.org
The modern recognition of subsoil with the use of CPTu static probes allows to obtain detailed information necessary for the designing. Registered basic two quantities, i.e. cone resistance qc and friction on the sleeve fs, often become direct data, which allow to estimate bearing capacity of the base and the side surface of the pile. Direct methods use similarity of the pile work and piezo-cone work during the examination. An important design stage is the appropriate development of measurement data prior to the commencement of the procedure of determining the pile bearing capacity. Algorithms generated on the basis of empirical experiments are often applied with the simultaneous use of test loads. The probabilistic approach is also significant, because it enables objective assessment of the reliability level of performed design calculations. This work contains an analysis of the impact on the estimated bearing capacity and reliability of a pile of variable random depth of the pile base. It also includes the determination of probabilities of obtaining the assumed safety index for the designed solution at random foundation depth.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.