Issue |
MATEC Web Conf.
Volume 195, 2018
The 4th International Conference on Rehabilitation and Maintenance in Civil Engineering (ICRMCE 2018)
|
|
---|---|---|
Article Number | 03006 | |
Number of page(s) | 10 | |
Section | Geotechnical Engineering | |
DOI | https://doi.org/10.1051/matecconf/201819503006 | |
Published online | 22 August 2018 |
Method of removing secondary compression on clay using preloading
Civil Engineering, Faculty of Civil Engineering Environment and Geo Engineering, Institut Teknologi Sepuluh Nopember, Indonesia
* Corresponding author: egadhianty12@gmail.com
Due to external loads, the soft soil will undergo a large compression of both primary and secondary compression. With soil improvement using prefabricated vertical drain (PVD), the time of primary compression becomes shorter so that secondary compression occurs in short time. There has been little research on how to remove secondary compression. Therefore, further investigation of behaviour and method of removing secondary compression is necessary. This research was conducted based on an experimental study of clay consolidation test with a variation of loading time in the laboratory. The results show that there is an empirical correlation among the secondary compression index (Cα’), the initial void ratio (e0), the void ratio at the end of primary consolidation (ep), and the effective consolidation stress (P’). The correlations obtained from this study are Cα’ = (0.0072e0 - 0.0067)P’ and Cα’ = (0.0077ep - 0.006)P’. The greater the effective consolidation stress is, the greater the secondary compression index will become. Therefore, in soil improvement secondary compression can be removed by giving an extra load (Δq) that causes additional compression to the primary consolidation where the magnitude equals to the expected secondary compression. Then, this Δq could be removed at the end of the primary consolidation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.