Issue |
MATEC Web Conf.
Volume 195, 2018
The 4th International Conference on Rehabilitation and Maintenance in Civil Engineering (ICRMCE 2018)
|
|
---|---|---|
Article Number | 02022 | |
Number of page(s) | 8 | |
Section | Structural Engineering | |
DOI | https://doi.org/10.1051/matecconf/201819502022 | |
Published online | 22 August 2018 |
Effect of monotonic lateral load on the performance of reinforced graded concrete column, an experimental study
1
Department of Civil Engineering, Faculty of Engineering, Universitas Negeri Malang, Indonesia
2
Department of Civil Engineering, Faculty of Engineering, Diponegoro University, Indonesia
3
Department of Architecture, College of Engineering, Nihon University, Koriyama, Japan
4
School of Engineering and Physical Science, University of Birmingham, The United Kingdom
* Corresponding author: mirza.abdillah.ft@um.ac.id
A gradation pattern in the strength of concrete columns is unavoidable due to the presence of static and dynamic segregation. The effect of concrete uniformity on columns subjected to monotonic lateral load is investigated experimentally in this study. Reinforced concrete columns with cross-sectional dimensions of 150 x 150 mm and a height of 1000 mm are prepared as graded concrete column (GCC) specimens and controlling specimens. The columns are designed with a reinforcement ratio of 1%. Two concrete mixes with a strength of 20 MPa and 30 MPa are cast in moulds using the gradual compaction procedure to create a satisfactory strength transition throughout the specimens’ height. The resulting lateral deformation and resisting load are utilised for further analysis. The analyses show that the GCC exhibits a lower peak load and lateral deformation than the control specimen, and a distinct failure mode is observed. The GCC also shows more brittle behaviour in the post-peak region.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.