MATEC Web Conf.
Volume 194, 2018Heat and Mass Transfer in the Thermal Control System of Technical and Technological Energy Equipment (HMTTSC-2018)
|Number of page(s)||6|
|Published online||21 August 2018|
Icing control model and algorithm for wasteheat exchangers of ventilation systems
Moscow Power Engineering Institute, 111250 Moscow, Russia
* Corresponding author: email@example.com
Currently, ice control on various heat exchangers to be used for waste heat recovery of discharge air is a rather topical subject because ice building is a factor to reduce efficiency of heat recovery. In such systems, icing always takes place on the side of humid discharge air, with a background of heat exchange between inlet air at temperatures of -30°C and below, and discharge air. To effectively prevent this, it is required to find solutions to problems as follows: study a mechanism of ice building on heat exchange surfaces when interacting with humid air; determine engineering methods to prevent icing, for each type of heat-exchange apparatus, and check efficiency of their operation; develop a mathematical model of ice growth on heat exchange surfaces to enable to vary key parameters (both geometrical and algorithmical ones), determined beforehand, and engineering means aimed at icing prevention.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.