MATEC Web Conf.
Volume 192, 2018The 4th International Conference on Engineering, Applied Sciences and Technology (ICEAST 2018) “Exploring Innovative Solutions for Smart Society”
|Number of page(s)||4|
|Section||Track 1: Industrial Engineering, Materials and Manufacturing|
|Published online||14 August 2018|
Bendability and failure mechanisms of dual phase steel under air-bending at elevated temperatures
Industrial Engineering Department, Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok, Thailand
Corresponding author: email@example.com
In this study, process parameters such as the bending angle and bending temperature of the metal sheets for pure bending of advanced high strength steel sheet DP980 were investigated using the air-bending method. This investigation focused on bendability and failure mechanisms. Experimental studies were carried out with various bending temperatures and the bending angle parameters to identify effect on springback angle, initial crack, and the evolution of the microstructure. Prior to testing, the DP steel sheets were heattreated at different temperatures (room temperature, 200 °C, 400 °C, and 600 °C) with a heating rate of 2 °C/S and 5 minutes of holding time in an electric furnace. As a result of the experiments performed at different temperature values and bending angle values, it was determined that an increase in the bending angle reduces the size of the springback angle. It was also determined that an increase in air-bending-temperature reduces the amount of springback. Air-bending-temperature also affected the microstructure evolution and slowed the cracking of the bent surface.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.