Issue |
MATEC Web Conf.
Volume 189, 2018
2018 2nd International Conference on Material Engineering and Advanced Manufacturing Technology (MEAMT 2018)
|
|
---|---|---|
Article Number | 11010 | |
Number of page(s) | 6 | |
Section | Semiconductor Applications | |
DOI | https://doi.org/10.1051/matecconf/201818911010 | |
Published online | 10 August 2018 |
Simulation and modeling of high voltage DC to AC PWM inverter for electrostatic generator
Dept. of Electrical and Computer Engineering, Faculty of Engineering, International Islamic University Malaysia, 53100 KL, Malaysia
Corresponding author: amotakabber@iium.edu.my
This paper proposes a single-phase DC to AC inverter for ESG (electrostatic generators) that may be used in the household’s application. The electrostatic generators were developed a while ago and remained abandoned for a long time. Now, as the modern technology advanced, it’s time to utilize the ESG to power generation. A pulse width modulation (PWM) based high voltage DC to AC inverter is a suitable system for converting the EGS high electrostatic DC voltage into standard 50Hz, 220V(rms) AC. The PWM technique is used to control the inverter switches to create a pulse width modulated bi-phase square wave signal. A lowpass LC filter has been utilized to remove the higher harmonic frequencies and which is capable to reduce the total harmonic distortion (THD) around 3.5%. The proposed model showed the overall system performance in terms of efficiency is 95%. To use ESG, this inverter is an easy and cost-effective electrical device. From the result, it is observed that the output voltage of the proposed inverter is greatly improved compared to the other inverter circuits.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.