| Issue |
MATEC Web Conf.
Volume 189, 2018
2018 2nd International Conference on Material Engineering and Advanced Manufacturing Technology (MEAMT 2018)
|
|
|---|---|---|
| Article Number | 06011 | |
| Number of page(s) | 6 | |
| Section | Factory Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201818906011 | |
| Published online | 10 August 2018 | |
The inverse kinematics analysis and simulation study on the controllable loading mechanism
1
Department of Engineering Machinery, Shandong Jiaotong University, Jinan 250357, China
2
Department of Mechanical Engineering, Guangxi University, Nanning 530004, China
*
Corresponding author: wolfunion@163.com
The multi-DOF controllable loading mechanism adopts the electric drive system to replace the hydraulic drive system of traditional loader, not only has higher transmission efficiency and has better mechanical and electrical integration level, but also overcome the shortcomings of high cost of manufacture and maintenance.The inverse kinematics model of this type of loading mechanism was built by means of closed loop vector method. According to the performance index of the loading mechanism, the inverse kinematics model was solved by means of MATLAB software, and the input motion law of the two driving lever at different period of time is obtained, and a small prototype is built, which provides the basis for control system programming of this new type of leading mechanism. To some extent, this research lays a foundation for further development of this type of loading mechanism.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.