MATEC Web Conf.
Volume 182, 201817th International Conference Diagnostics of Machines and Vehicles
|Number of page(s)||7|
|Section||Diagnostics of Machines and Vehicles|
|Published online||30 July 2018|
The influence of the applied window function and sampling frequency on the assessment accuracy of the turbine engine in flight control condition based on its ground tests
Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45C street, 15-351 Białystok, Poland
2 Air Force Institute of Technology, Księcia Bolesława 6 street, 01-494 Warszawa, Poland
Corresponding author: firstname.lastname@example.org
The article presents the basis of the method allowing to assess the state of control condition of a turbine jet engine during the plane flight when the input signal to the engine is unpredictable interference signal „z". Method is based only on signals acquired during engine ground test when the input signal is „w" delivered by technical support using the engine control lever (DSS). The control state of the engine both from the set value „w" and „z" is expressed by the quotient of its cross power spectral densities (in frequency domain). The way of transition from the frequency domain to the time domain was presented, it allows to obtain step responses of engine from „z" and „w", greatly facilitating the interpretation of the obtained results.. The analysis of the influence of choosing types of the window function and signals sampling frequency on the accuracy of the proposed model has been carried out.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.