MATEC Web Conf.
Volume 177, 2018The 5th International Seminar on Ocean and Coastal Engineering, Environmental and Natural Disaster Management (ISOCEEN 2017)
|Number of page(s)||6|
|Published online||04 July 2018|
Analysis of the buckling moment on rectangular hollow pipe under pure bending load
Naval Architecture Departement, Diponegoro University,
* Correspondingauthor : firstname.lastname@example.org
Not only the circle hollow pipe but also the rectangular hollow pipes are used on offshore structure. In this study, the bending moment was given at both end of pipe. The strength of buckling moment can be reduced by increasing the length. The rectangular pipe models are varying from a/b = 1, 2, 4; a/t = 10, 15, 20 and L/a = 10, 15, 20. On the rectangular pipe which is have larger rectangle area (a/b), have the larger deformation. Vice versa on the rectangular pipe which is have smaller rectangle area (a/b), as though on a/b = 2 and a/b = 4 which is have smaller deformation. The conclude that is the larger one of rectangle area then the oval deformation is large too. The buckling strength will increase with decreasing a/b and deformation at mid span will be increase. The buckling strength decrease with increasing of L/a and a/t. The strength of the buckling moment in the elastic state will decrease with increasing of a/t and a/b. For a/b = 1, the strength of buckling moment will tend to be equal at L/a = 10-20. Pipe with increasing of a/t, L/a and a/b will be elastic.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.