MATEC Web Conf.
Volume 175, 20182018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|Number of page(s)||6|
|Section||Urban Planning, Environment and Construction|
|Published online||02 July 2018|
Seismic Performance Analysis of Continuous Rigid Frame Bridges in Expressway under Non-linear Interactions of Soil-Piles
CCCC Infrastructure Maintenance Group CO., LTD., 100011 Beijing, China
* Corresponding author: email@example.com
Taking the three-span pre-stressed concrete continuous rigid frame bridge as an engineering example, MIDAS Civil was utilized to establish a spatial finite element model and the interaction between pile foundation and the soil was simulated by equivalent soil spring. In addition to analyzing shearing force, bending moment and stress of the primary beam's characteristic section under different loads, a response spectrum method and time history analysis were adopted to conduct seismic response analysis respectively. In this case, performance of the bridge could be comprehensively evaluated. Relevant analysis results indicate that internal force of the large-span pre-stressed concrete continuous rigid frame bridge is mainly induced by gravity and pre-stress of the structure; section stresses of the primary beam satisfy the corresponding specification and structural safety can be achieved in a state of operation. Moreover, computed results obtained by the response spectrum method is more conservative than those of the time history analysis. In terms of continuous rigid frame bridge, different seismic directions should be taken into consideration during structural seismic analysis at different construction stages.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.