Issue |
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|
|
---|---|---|
Article Number | 03041 | |
Number of page(s) | 4 | |
Section | Computer Simulation and Design | |
DOI | https://doi.org/10.1051/matecconf/201817503041 | |
Published online | 02 July 2018 |
The Application of Douglas-Peucker Algorithm in Collaborative System for Power Grid Operation Mode Calculation
1
China Electric Power Research Institute, Beijing 100192, China
2
Institute of Electrical Engineering, Southeast University, Nanjing, China
a Corresponding author: E-Mail: Chenjilin@epri.sgcc.com.cn
The collaborative system for power grid operation mode calculation implements data management of multi-level paralleling operated dispatching departments indifferent places and joint operation mode calculation, which is based on the calculated data of power grid operation modes. The transient stability analysis monitors the components of electrical variation curve through the network transmission to the web page. When more users and more curves reach a certain extent, the overall simulation time is longer and the curve is stuck because of the limitation of the transmission bandwidth and the refresh rate of the web page. This paper, The Douglas Peucker algorithm is used in system to solve the data transmission of large amount of data delay problem and achieve the transmission of the large amount of data, the overall simulation time of curve in the web page display is decreased, the curves are refreshed smoothly.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.