Issue |
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|
|
---|---|---|
Article Number | 03030 | |
Number of page(s) | 4 | |
Section | Computer Simulation and Design | |
DOI | https://doi.org/10.1051/matecconf/201817503030 | |
Published online | 02 July 2018 |
Gateway Electric Energy Meter Measurement System Based on Independent Load Control
1
Measurement Center, State Grid HuBei Electric Power Company, Wuhan Hubei 430080, China
2
Electric Power Research Institute, State Grid HuBei Electric Power Company, Wuhan Hubei 430077, China
a Corresponding author: author@e-mail.org
In order to meet the efficiency and timeliness measurement requirements for electric energy meters with different specifications in gateway energy meter testing laboratory, a new testing system based on multithreading technique is proposed here. Through identifying the different wiring modes of electric meters, integrating with newly designed CT based on zero-flux compensation principle and applying creative multi-channel load control for different tap positions, the system can provide differentiated testing loads for different meters at the same time. Meanwhile, electric energy pulses required by different electric energy meters can be worked out by one standard meter. Consequently, completely independent measurement for different meters will be achieved with improved timeliness substantially. Through simulation tests for different electric energy meters, and comparison for calculated testing time, the initial design purposes are tested and verified.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.