MATEC Web Conf.
Volume 174, 20183rd Scientific Conference Environmental Challenges in Civil Engineering (ECCE 2018)
|Number of page(s)||8|
|Section||Material Engineering, Waste Management in Civil Engineering|
|Published online||26 June 2018|
Parameters of hardened concrete with the addition of metakaolin
Kielce University of Technology, Al. Tysiąclecia PP 7, 25-314 Kielce, Poland
* Corresponding author: email@example.com
There is currently no known one recipe for a concrete mix that would be suitable in all operating conditions. At present, in addition to the basic ingredients, mineral additives and chemical admixtures can be found in the formulas of concrete mixes. Each intentionally introduced addition to the concrete mix affects the rheological characteristics of the concrete mix as well as the parameters of hardened concrete. The use of mineral additives replacing cement and aggregate in a concrete mix should contribute to environmental protection in a simple and economical way. If, in addition, additives are by-products of industry, they should be managed. Alternatively, one should look for possibilities of their neutralization, eg in the concrete industry. The article applies to laboratory tests of concretes with the addition of 0%, 10%, 20%, 30% metakaolin. The additive was replaced with cement in a concrete mix. The effect of the additive on compressive strength, water absorption and capillary rupture of concretes was investigated. Compressive strength was tested after 14, 28, 56 and 90 days. Water absorption and capillary rupture was tested after 28, 56 and 90 days.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.