| Issue |
MATEC Web Conf.
Volume 173, 2018
2018 International Conference on Smart Materials, Intelligent Manufacturing and Automation (SMIMA 2018)
|
|
|---|---|---|
| Article Number | 03064 | |
| Number of page(s) | 5 | |
| Section | Digital Signal and Image Processing | |
| DOI | https://doi.org/10.1051/matecconf/201817303064 | |
| Published online | 19 June 2018 | |
Multiple Parameters Estimation of BOC Signal in Multipath Environment
Chongqing Key Laboratory of Wireless Communications, Chongqing University of Posts and Telecommunications, Chongqing 400065, China
* Corresponding author: wangyang@cqupt.edu.cn
For the multiple parameters estimation of BOC signal at the low SNR and multipath environment, the method which applies the characteristics of cyclic spectrum is developed. Firstly, the cyclic spectrum function of multipath BOC signal is derived. Then the cyclostationary property of BOC signal is analyzed. Finally, a novel parameter estimation algorithm of BOC signal, which makes use of the position of cyclic spectral peaks to estimate the carrier frequency, the subcarrier rate and PN code rate, is present. In the experiment the time-domain smoothing method is used to calculate the cyclic spectrum of BOC signal when the frequency is equal to zero in order to avoid the multidimensional search. At the same time using the method of the cumulative average can increase the SNR margin of the algorithm. Simulation results show that the multiple parameters of multipath BOC signal can be estimated effectively and the estimation performance is associated with the multipath environment.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.