| Issue |
MATEC Web Conf.
Volume 173, 2018
2018 International Conference on Smart Materials, Intelligent Manufacturing and Automation (SMIMA 2018)
|
|
|---|---|---|
| Article Number | 02046 | |
| Number of page(s) | 5 | |
| Section | Automation and Nontraditional Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201817302046 | |
| Published online | 19 June 2018 | |
Transient analysis on track circuits in crack state
School of Automation & Electrical Engineering, Lanzhou Jiao tong University, Lanzhou, China. 730070
* Corresponding author: zhaobin@mail.lzjtu.cn
The transient transformation of track circuit between the normal state and crack state is analyzed. Firstly, the model of crack state of track circuit in the complex frequency domain is established. According to the boundary conditions of crack state of track circuit, the expression of current traveling wave in the receiving end is obtained in complex frequency domain. Based on it, the numerical solution in the time domain is got by FFT&IFFT conjunction with quotient-difference (Q-D) algorithm. Then, the steady state of circuit in normal state is taken as state of zero moment of track circuit, the transient process from normal state transform into crack state is solved. Thirdly, the Electro-Magnetic Transient Program (EMTP) model of crack operation is established to prove that the transient analysis result is correct. It provides a power theoretical basis to distinguish the operation state of track circuit by transient analysis.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.