| Issue |
MATEC Web Conf.
Volume 170, 2018
International Science Conference SPbWOSCE-2017 “Business Technologies for Sustainable Urban Development”
|
|
|---|---|---|
| Article Number | 03011 | |
| Number of page(s) | 7 | |
| Section | Engineering Systems and Building Materials | |
| DOI | https://doi.org/10.1051/matecconf/201817003011 | |
| Published online | 13 June 2018 | |
Reasonability to use device for making horizontal wedge thrust of rolling stand
1
Peter the Great St.Petersburg Polytechnic University, Polytechnicheskaya, 29, St. Petersburg, 195251, Russia
2
LLC «Saint-Petersburg Electrotechnical Company», Pushkin, Parkovaya, 56, Saint-Petersburg, 196603, Russia
3
Pryazovskyi State Technical University, Universytets’ka, 7, Mariupol, 87500, Ukraine
4
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: artiukh@mail.ru
Necessity and reasonability to use gapless connection between contact surfaces of lining straps of work rolls chocks and facing strips of housings (inner lining straps of back-up rolls chocks) to reduce dynamic horizontal forces during rolling and increase durability of equipment are considered. Technical solution is described on base of roughing reversing rolling stand of thick sheet rolling mill 3000 of PJSC ‘ILYICH iron and steel works’ (Mariupol city, Ukraine) which can be used on most heavy loaded sheet and tube rolling mills.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.