MATEC Web Conf.
Volume 167, 20182018 3rd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2018) – 2018 3rd International Conference on Design, Engineering and Science (ICDES 2018)
|Number of page(s)||5|
|Section||Engineering Modeling and Mechatronics|
|Published online||23 April 2018|
Electromagnetic Field Simulation in a Microwave Chamber with Multiple Waveguides
Department of Mechanical Engineering, Kongju National University College of Engineering, Korea
2 Department of Mechanical Engineering, Industrial Technology Research Institute, Kongju National University College of Engineering, Korea
a Corresponding author: email@example.com
While microwaves have many features and advantages, problems may occur, including non-heating, partial overheating, and fire due to damaged magnetrons caused by reflected waves, when they are used without a proper understanding of the permittivity of the object to be heated, the electromagnetic field distribution, the matching between the chamber and the waveguide, and the reflected electromagnetic waves. Simulation was performed using the Ansys HFSS tool. Conditions for the uniform electromagnetic field were derived using the distance from the waveguides to the ceramic material as well as the microwave energy intensity as major parameters.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.