| Issue |
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
|
|
|---|---|---|
| Article Number | 16003 | |
| Number of page(s) | 7 | |
| Section | Multi-Axial, Variable and Complex Loadings | |
| DOI | https://doi.org/10.1051/matecconf/201816516003 | |
| Published online | 25 May 2018 | |
Thermomechanical fatigue behaviour of ferritic stainless steel grades for high temperatures applications
APERAM, Centre de Recherche, 62330 Isbergues, France
* Corresponding author: pierre-olivier.santacreu@aperam.com
Nowadays high temperatures resistant materials are needed to resist to high temperature applications (up to 1000°C), such as automotive exhaust gas manifolds. Some developed stainless steel grades, including ferritic grades or austenitic refractory grades, can be used in this temperature range and both in continuous or cyclic thermal conditions. In order to predict the thermomechanical fatigue damage of stainless steel parts submitted to cyclic thermal loading and constrained bonding conditions, the elastoviscoplastic model by Chaboche is determined for a wide range of temperatures, of strain amplitudes and strain rate levels thanks to isothermal traction-compression tests. The validation procedure is performed afterward by comparison with stabilized behavior under non isothermal conditions on a dedicated thermal fatigue test performed on V-shape specimens. Results of simulation show very good fitting with the experimental curves which would lead to a more accurate fatigue life prediction. A damage model was derived from Taira’s thermal low-cycle fatigue model to include dwell-time period at high temperature and creep-oxidation effect. In this paper the example of K44X, a dedicated grade for high temperatures applications, is presented.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.