MATEC Web Conf.
Volume 162, 2018The 3rd International Conference on Buildings, Construction and Environmental Engineering, BCEE3-2017
|Number of page(s)||4|
|Section||Water Resources Engineering and Geomatics|
|Published online||07 May 2018|
3D Digital modeling for archeology using close range photogrammetry
Building and Construction Engineering Department, University of Technology, Baghdad, Iraq
* Corresponding author: email@example.com
This research is to evaluate the feasibility of applying three-dimensional modelling of the close-range photogrammetry in documenting archaeological monuments by using digital photogrammetry image processing software and digital consumer camera. The digital camera used was Nikon D3100, the processing software was (AgiSoft PhotoScan) and (ArcGIS, ArcScene extension). The study area was selected in the centre of Baghdad province by choosing one of the archeological monuments in it, namely the Abbasid alace. A set of camera locations represent the locations of the images, and as a result of the processing, 81 digital images were arranged in a sequence in which the results of this step were verified. The points cloud after processing were 1,082,617 points. Six control points were selected, used as distances constrained. The validity of the fixed location of the points can be ascertained by checking the data. The program provide the error and accuracy for each image, where a total error in the scale bar was 0.005253 meters, a total error of marks points was 0.010957 meters and the accuracy for all six points was 0.005 meters.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.