MATEC Web Conf.
Volume 156, 2018The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|Number of page(s)||5|
|Section||Membrane Science, Material and Technologies|
|Published online||14 March 2018|
Preparation and Characterization of Porous Ceramic Membranes for Micro-Filtration from Clay/CuZn Using Extrusion Methods
Mechanical Engineering Department, Universitas Muhammadiyah Semarang, Indonesia
Corresponding author: email@example.com
In this study, fabrication and characterization of ceramic membranes preparation was carried out. Porous ceramic membranes were fabricated by extrusion process from different percentage composition of CuZn on (80 wt% Clay, 10 wt% TiO2, 5 wt% Carbon and 5 wt% PVA). The fabricated membranes were sintered at 900°C for 1 hour in an electrical box furnace with heating rate 1oC/min and holding time for 1 hour. Apparent density and porosity were determined by standar methods for ceramic materials. Phase composition of the ceramic support was established by X-Ray Diffraction analysis. SEM studies of the membranes added at different CuZn were carried out.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.