| Issue |
MATEC Web Conf.
Volume 156, 2018
The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|
|
|---|---|---|
| Article Number | 03038 | |
| Number of page(s) | 5 | |
| Section | Processes for Energy and Environment | |
| DOI | https://doi.org/10.1051/matecconf/201815603038 | |
| Published online | 14 March 2018 | |
Drinking Water Treatment by Inductively Coupled Plasma System to Remove of Microorganisms in River Water
1
Chemical Engineering Department, Universitas Bung Hatta, 25147, Padang, Indonesia
2
Electrical Engineering Department, Andalas University, 25166, Padang, Indonesia
* Corresponding author: renidesmiarti@gmail.com
Inductively coupled plasma system was used in drinking water treatment system to kill the microorganisms in water such as total coliforms (TC), fecal coliforms (FC) and other coliforms (OC) from river water. The aim of this study was to investigate the effect of flowrate on removal efficiency (RE), death rate, and death yield and energy consumption of bacteria's. The frequency of the system was set at 4.6 MHz. The results show that the removal efficiencies and death rate of TC, FC and OC decreased with increasing flowrate. Compared to FC, the first-order reactions of TC and OC were lower in the following order: FC > OC > TC. The death yield of TC and OC significantly increased when the removal efficiency increased. The electromagnetic flux varied from 19.44 to 20.55 W/cm2 and the energy consumption was 0.26, 0.32, and 0.67 with flow rate at 20, 10 and 5 mL/minute, respectively. These results are very necessary to improve drinking water treatment.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.