| Issue |
MATEC Web Conf.
Volume 156, 2018
The 24th Regional Symposium on Chemical Engineering (RSCE 2017)
|
|
|---|---|---|
| Article Number | 03031 | |
| Number of page(s) | 5 | |
| Section | Processes for Energy and Environment | |
| DOI | https://doi.org/10.1051/matecconf/201815603031 | |
| Published online | 14 March 2018 | |
Bioleaching of trace metals from coal ash using local isolate from coal ash ponds
1
Chemical Engineering Department, Pamantasan ng Lungsod ng Maynila, Manila, Philippines
2
Chemical Engineering Department, De La Salle University, Manila, Philippines
3
Department of Environmental Engineering and Water Technology, UNESCO-IHE Institute for Water Education, Delft, The Netherlands
* Corresponding author: dcpangayao@plm.edu.ph
Bioleaching of chromium, copper, manganese and zinc from coal ash were investigated using isolates from coal ash ponds particularly Psuedomonas spp. Six (6) different coal ash ponds were examined however, after initial screening Psuedomonas spp. were only present in three (3) coal ash ponds. Among the three coal ash ponds, results showed that eight (8) putative Pseudomonas spp. isolates were present that were identified using the Polymerase Chain Reaction (PCR). Using the eight putative Pseudomonas spp. for bioleaching at optimum conditions and 15 days, the pH value ranges from 8.26 to 8.84 which was basic in nature. Moreover, the maximum metal leached were 8.04% Cr, 12.05% Cu, 4.34% Mn and 10.63% Zn.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.