| Issue |
MATEC Web Conf.
Volume 155, 2018
VIII International Scientific and Practical Conference “Information and Measuring Equipment and Technologies“ (IME&T 2017)
|
|
|---|---|---|
| Article Number | 01023 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/matecconf/201815501023 | |
| Published online | 28 February 2018 | |
Automation of the Design of the Anchorage System Taking into Account the Geomechanical State of the Massif and Mining Development Schemes
Karaganda State Technical University, 100027, Karaganda, Kazakhstan
1 Corresponding author: tom44487@mail.ru
The article presents the system for the automation of the design of the anchorage, which regulates the calculation of the required parameters of the fasteners for the fastening of the fastening system. The main factors affecting the operation of the anchor support are grouped in the following way: mining and geological conditions, technical characteristics of the anchor support, geomechanical conditions for conducting and operating the mine workings. Mining and geological conditions for carrying out excavations include: physical and mechanical properties of rocks, the category of roof stability, fracturing, etc. Technical characteristics of the anchor support: material of the rod, filler, filling completeness, etc. Conditions (geomechanical) of carrying out and exploitation of the mine workings: the depth of the conduct, the location relative to the zone of influence of the cleaning works, the location relative to the waste zone, etc. As a result of calculations the program gives out the basic parameters of the anchor support, which coincide with the parameters adopted by the passport.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.