| Issue |
MATEC Web Conf.
Volume 251, 2018
VI International Scientific Conference “Integration, Partnership and Innovation in Construction Science and Education” (IPICSE-2018)
|
|
|---|---|---|
| Article Number | 04066 | |
| Number of page(s) | 8 | |
| Section | Modelling and Mechanics of Building Structures | |
| DOI | https://doi.org/10.1051/matecconf/201825104066 | |
| Published online | 14 December 2018 | |
Layered composite and contact layer. Normal separation and transversal strength
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: asv@mgsu.ru
As well as testing adhesion joints, in which the average adhesion shear strength is measured, there are widespread methods of testing for normal separation, in which the value called transversal strength is measured. This value is calculated as the ratio of the breaking load applied perpendicular to the gluing plane, to the gluing area. At the same time, two types of tests for normal separation - for cylindrical and prismatic joints - are now standardized. The article deals with the solution of this problem for prismatic compound obtained on the basis of the contact layer model.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.