Issue |
MATEC Web Conf.
Volume 250, 2018
The 12th International Civil Engineering Post Graduate Conference (SEPKA) – The 3rd International Symposium on Expertise of Engineering Design (ISEED) (SEPKA-ISEED 2018)
|
|
---|---|---|
Article Number | 07001 | |
Number of page(s) | 8 | |
Section | Science | |
DOI | https://doi.org/10.1051/matecconf/201825007001 | |
Published online | 11 December 2018 |
Applications GIS for earthquake threat mapping in Sabah
1
Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat Johor, Malaysia
2
Centre for Diploma Studies, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat Johor, Malaysia
Disaster incidents will disrupt the daily life and cause suffering to the victims of incident. The earthquake is one of the series unpredictable incident. This incident causes the concerns of academicians, engineers, planners, decision-makers and governments to prevent and manage the disaster. The disaster threat index is analyzed with using GIS software. The data that analyzed will divide into three levels which are a lower, moderate and extreme threat. The results of the analysis on the earthquake threats in Sabah revealed that 99.9% was in the area of earthquake threats with a total area is 7 382 144 ha while areas with no earthquake threats was 0.1% with an area is 17 206 ha. From the result also, known that the high seismic hazard index is Lahad Datu with an area of 463 540 ha while the lower earthquake threat index is Tambunan with an area of 588 ha. With this result, it will indirectly facilitate various parties to prepare and plan strategies to reduce the losses and damage from the earthquake disaster. Besides that, with the result also will facilitate the responsible agency to prepare an early safety plan to reduce the loss of life and property damage.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.