MATEC Web Conf.
Volume 245, 2018International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|Number of page(s)||11|
|Published online||05 December 2018|
Modes of operation and design features of pulse cables for the ITER project
Peter the Great Saint-Petersburg Polytechnic University, Saint-Petersburg, Russian Federation
* Corresponding author: firstname.lastname@example.org
Cables with high current capacity are used in power devices, including special-purpose ones operating in impulse modes. It is important to ensure low inductance of such cables, because these type cable products are often used as connecting products. This article discusses the problems that arise in the design and manufacture of special low-inductance impulse cables (SLIC) for power supply and protection of the superconducting magnetic system of the ITER reactor (France), the distinguishing features of which are the optimum ratio of insulation thickness and throughput at low inductance.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.