Issue |
MATEC Web Conf.
Volume 245, 2018
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|
|
---|---|---|
Article Number | 12007 | |
Number of page(s) | 7 | |
Section | Innovative Technologies in Environmental Management | |
DOI | https://doi.org/10.1051/matecconf/201824512007 | |
Published online | 05 December 2018 |
On the possibility of using ion-exchange filters for water treatment
Industrial University of Tyumen, Institute of service and sectoral management, 625000, Russia, Tyumen, Volodarskogo, 38
* Corresponding author: ecogtv@mail.ru
This study was conducted with the aim of preliminary assessment of the total use of the working exchange capacity of cation-exchangers during ion-exchange filtration of surface waters. The chemical composition of natural waters in Russia depends on many factors, which affects the performance indicators during operation of water treatment equipment. Comparison of geochemical indicators of natural waters of the Ob River basin at specific locations of water withdrawal in the Ural Federal District of Russia was carried out. For several compositions of natural waters, the calculation of two-stage ion-exchange filtration in the water treatment scheme for heat and power plants has been carried out. The possibility of rational use of ion-exchange filtration at the first stage of water purification and low efficiency of the use of ion-exchange filtration at the second stage of filtration for these plants is shown.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.