| Issue |
MATEC Web Conf.
Volume 245, 2018
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|
|
|---|---|---|
| Article Number | 09015 | |
| Number of page(s) | 8 | |
| Section | Fluid Mechanics | |
| DOI | https://doi.org/10.1051/matecconf/201824509015 | |
| Published online | 05 December 2018 | |
Numerical simulation of electrohydraulic processes
1
Peter the Great St. Petersburg Polytechnic University, Polytechnicheskaya 29, St. Petersburg, 195251, Russian Federation
2
Valiant Int., 2469 Executive Hills Dr, Auburn Hills, MI 48326, USA
* Corresponding author: mamutov_vs@spbstu.ru
Using the finite element software complex LS-DYNA 971, the technique of simulating processes of Electro-Hydraulic forming is developed. The law of energy deposition is obtained from semi-analytical calculation. A simulation of complex EHF process, which includes discharge chamber with electrodes, plasma channel, water, deformable blank that is formed into a rigid die, is performed using the developed technique. The simulation is validated by experimental results. The developed technique significantly extends practical usage of numerical simulation of electrohydraulic forming and other electrohydraulic-based technologies.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.