Issue |
MATEC Web Conf.
Volume 245, 2018
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|
|
---|---|---|
Article Number | 08001 | |
Number of page(s) | 5 | |
Section | FEM and Structural Mechanics | |
DOI | https://doi.org/10.1051/matecconf/201824508001 | |
Published online | 05 December 2018 |
The strength of welded structures at low climatic temperatures
Peter the Great St.Petersburg Polytechnic University, 195251 St.Petersburg, Polytechnicheskaya, 29, Russian Federation
* Corresponding author: vassilyev.ivan.iv@gmail.com
Methods for the selection of steels for metal structures were analyzed in accordance with the normative documents GOST 32578-2013, ISO 20332-2015 and F.E.M.1.001. As the example the choice of steel 09G2S was confirmed for a metal structure of a crane, operated at a temperature of minus 55° C. To confirm the correctness of the choice of steel for this design and justify the allowable size of defects, welded samples were tested at temperatures from plus 20 to minus 60° C.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.