MATEC Web Conf.
Volume 245, 2018International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|Number of page(s)||6|
|Section||Engineering Nets and Equipment|
|Published online||05 December 2018|
Improving the efficiency of power boilers by cooling the flue gases to the lowest possible temperature under the conditions of safe operation of reinforced concrete and brick chimneys of power plants
Ufa State Aviation Technical University, Department of aviation heat engineering and heat power engineering, Karl Marx street 12, city Ufa, Republic of Bashkortostan, 450008, Russian Federation
2 Salavat thermal power plant LLC “Bashkir generating company”, Management, mailbox №20, city Salavat, Republic of Bashkortostan, 453256, Russian Federation
* Corresponding author: firstname.lastname@example.org
The article presents data on the calculated values of improving the efficiency of fuel use at the thermal power plant as a result of the introduction of a technical solution for cooling the flue gases of boilers to the lowest possible temperature under the conditions of safe operation of reinforced concrete and brick chimneys with a constant value of the flue gas temperature, when changing the operating mode of the boiler.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.