MATEC Web Conf.
Volume 245, 2018International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018)
|Number of page(s)||7|
|Section||Building Materials and Products|
|Published online||05 December 2018|
Thermal - insulation material for frame panels with an internal non-metallic layer
Industrial University of Tyumen, Volodarskogo str. 38, Tyumen, 625001, Russia
* Corresponding author: firstname.lastname@example.org
The foam plastic capable to work in frame panels as a thermal - insulation and facing and decorative material can be only of composite type. We have developed a new type of composite foam plastic, its density increases from center to surfaces. The article presents the composition of new material, the technology of its production, as well as the mathematical model of the mechanism of formation of strong crusts at its surfaces. Microscopic analysis of the composite showed that the density of crust is more than 200 kg / m3, the density of the foam plastic in its middle part is 80 kg / m3. The limit of strength at punching it by the rod diameter 0.01 m reaches 3.5 MPa. The material is used for the manufacture of roofing panels, frame panels with an internal non-metallic layer.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.