Issue |
MATEC Web Conf.
Volume 243, 2018
XIV International Workshop High Energy and Special Materials: Demilitarization, Antiterrorism and Civil Application (HEMs-2018)
|
|
---|---|---|
Article Number | 00024 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/matecconf/201824300024 | |
Published online | 05 December 2018 |
Structure and mechanical properties of A356-C alloys
National Research Tomsk State University, Russia, Tomsk, 36 Lenin Ave., 634050
* Corresponding author: khmelmg@gmail.com
The paper deals with influence of mechanical mixing and vibration treatment on the structure and mechanical characteristics of the aluminum alloy containing ≤ 1 wt.% of nanodiamonds (A356-C). The alloy was obtained from industrial A356 Al-Si casting alloy by means of an integrated effect of mechanical mixing and vibration. It has been shown that the introduction of nanodiamond particles contributes to improving the alloy structure and increasing its mechanical tensile properties. The structure of the A356 aluminum alloy has been refined with introduction of 0.2 wt% nanodiamonds and application of vibration melt treatment. The introduction of nanodiamonds into the melt and the vibration melt treatment enable one to increase the yield strength and tensile strength of the A356 aluminum alloy without any change in ductility.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.