MATEC Web Conf.
Volume 150, 2018Malaysia Technical Universities Conference on Engineering and Technology (MUCET 2017)
|Number of page(s)||6|
|Section||Mechanical ' Manufacturing|
|Published online||23 February 2018|
Conceptual Design for an Anti-Thief Donation Box
Centre for Advance Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia
2 Faculty of Mechanical Engineering. Universiti Teknikal Malaysia Melaka., Hang Tuah Jaya, 76100, Durian Tunggal, Melaka, Malaysia
* Corresponding author: firstname.lastname@example.org
The donation box is commonly used to collect money to from the society for charity purpose. Due to the increase case of the stealing involving donation box, it indicates that the current design of the box is not safe. A research survey are being conducted and the newly design Anti-Thief Donation Box is is introduced in this paper. The material chosen for prototype is mild steel upon its strength and durability. The manufacturing method involved are welding, grinding and drilling. Special specification on this donation box includes the dual manual locking mechanism and the button controlled alarm mechanism.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.