Issue |
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
|
|
---|---|---|
Article Number | 01087 | |
Number of page(s) | 3 | |
Section | Session 1 : Materials & Pathologies | |
DOI | https://doi.org/10.1051/matecconf/201814901087 | |
Published online | 14 February 2018 |
High efficient photocatalytic activity of Zn-Al-Ti layered double hydroxides nanocomposite
1
Laboratory of Applied Solid State Chemistry, Faculty of Science, Mohammed V University, Rabat, Morocco
2
Laboratoire of Nanomaterial, Nanotechnology and Environment, Physico-chemical of Material and Catalysis (URAC26), Faculty of Sciences, University of Mohammed V-Rabat, Av. Ibn Battouta, BP 1014
This work establishes a simple method for synthesising layered double hydroxides (LDHs) powders with coprecipitation. The characteristics of the samples were investigated y X-ray diffraction (XRD), scanning electron microscopy (SEM) and spectrophotometer UV–Vis (DRS). Non-uniform distribution was shown for LDHs samples by SEM. Photocatalytic efficiencies were tested using methylene blue (MB) dye as a model contaminant under UV irradiation. In particular, Zn–Al-Ti LDH exhibited an excellent performance towards MB degradation compared with commercial TiO2 nanoparticles. Methylene blue removal percentage was reached at almost 100%, whereas commercial TiO2 reached a removal rate of only 66% under the same conditions within 20 min. The aim of the current work is to prepare Zn-Al-Ti layered double hydroxides nanocomposite and to evaluate their photocatalytic activity in the removal of methylene blue under UV irradiation.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.