Issue |
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
|
|
---|---|---|
Article Number | 01021 | |
Number of page(s) | 4 | |
Section | Session 1 : Materials & Pathologies | |
DOI | https://doi.org/10.1051/matecconf/201814901021 | |
Published online | 14 February 2018 |
Valorization of glass and shell powders in the synthesis of Belitic clinker
1
Mohammed V University, Faculty of science, Rabat, Morocco
2
Mohammed V University, ENS of Rabat, Morocco
In recent years, waste recycling has become a key issue in construction materials science for achieve the goal of sources of raw materials. The aim of this study is to use waste glass as source of SiO2 oxide and mussel shells consisting essentially of calcium carbonate as starting materials to synthesize belite rich cement. The elaborated clinker is chemically and structurally related to β-Ca2SiO4, by heat solid state activation. After grinding, the raw materials are mixed and heated up to 1050°C. The samples are characterized by X-ray diffraction (XRD) and Fourier Transformed Infrared spectroscopy (FT-IR). The mechanical strength of some sample was measured for 28 and 72 days. The results show the different mineralogical stapes of formation of clinker, the state reaction method allows the elaboration of a cementitious material by a simple heat treatment at relatively low temperature and low release of CO2. The hydration products are also identified by XR diffraction at 2, 7, 28 and 72 days.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.