| Issue |
MATEC Web Conf.
Volume 146, 2018
9th International Scientific Conference Building Defects (Building Defects 2017)
|
|
|---|---|---|
| Article Number | 01011 | |
| Number of page(s) | 6 | |
| Section | Building Information Modeling (BIM) | |
| DOI | https://doi.org/10.1051/matecconf/201814601011 | |
| Published online | 22 January 2018 | |
System description of the defect creation and elimination in the buildings
Czech Technical University in Prague, Faculty of Civil Engineering, Department of Engineering Informatics, Thákurova 7, 16629 Prague, Czech Republic
* Corresponding author: vytlacil@fsv.cvut.cz
The paper deals with the dynamics of the system of defects creation in the buildings and also with the possibilities of the defects elimination. The problem is described by the dynamic model that includes key elements influencing the system behaviour. The model is based on the system dynamics method that uses the stock elements and the flow elements which change the stock element values. In the described problem the main stock is the number of the equipment defects. This parameter can be increased by the flow element that depends on the time of using and the load. For the defect elimination are two possibilities: the planned maintenance and the repair of broken parts. Other elements are number of workers available for the elimination of defects and the running cost depending on the maintenance effort. The case of the main system parameters calculation is presented. The model can be used for understanding the importance of the maintenance in the field of facility management.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.