| Issue |
MATEC Web Conf.
Volume 145, 2018
NCTAM 2017 – 13th National Congress on Theoretical and Applied Mechanics
|
|
|---|---|---|
| Article Number | 03013 | |
| Number of page(s) | 9 | |
| Section | Fluid Mechanics | |
| DOI | https://doi.org/10.1051/matecconf/201814503013 | |
| Published online | 09 January 2018 | |
Technical project for a new water purification solution
1
COMOTI – Romanian Research and Development Institute for Gas Turbines, Gas Turbines Special Components. Physics and Mechanic Testing Department, 220D Iuliu Maniu, 061126 Bucharest, Romania
2
University of Ruse „Angel Kanichev”, 8 Studentska, 7017, Russe, Bulgaria
* Corresponding author: adina.toma@comoti.ro
This research is part of the RO-BG Cross-Border Cooperation Program, project “CLEANDANUBE”, MIS-ETC 653, which has finalised by providing a common strategy to prevent the Danube’s pollution technological risks with oil and oil products. This paper presents a new sustainable water purification solution. A short introduction will be offered and an overview regarding the research and new methods to greening the waste is provided. The theoretical aspects of the centrifugal separation phenomenon are studied and the preliminary project bases were established. The paper conveys the possible constructive variations and the technological implications of those. Ultimately, the technical project for a new water purification solution and conclusions with critical points encountered during the designing phase are presented.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.